-
What is a stop frame for rapier towel looms
2025-06-23The warp stop frame used in the rapier towel loom is a key device on the loom used to monitor the warp yarn status and ensure weaving quality. Its main function is to trigger the shutdown in a timely manner when the warp yarn breaks or abnormalities occur, avoiding the production of defective products. Here is a detailed introduction:
-
What are the characteristics of the 6-row warp stopping device used in Tsudakoma jet looms
2025-06-16The 6-row stopping device of the Tsudakoma jet loom has the following characteristics: 1. Trigger sensitivity: Through the clever design of the torsion spring and trigger plate, even the slightest changes in the warp state can quickly drive the trigger plate to change the angle, thereby triggering the warp stopping action in a very short time, causing the weaving machine to quickly stop running.
-
What are the advantages of textile equipment warp strips
2025-06-03The warp stop strip in textile equipment is a key component of the loom's warp break self stop device, mainly used to detect whether the warp yarn is broken and trigger the loom to stop, avoiding the production of defective products. Its design advantages revolve around core requirements such as detection sensitivity, reliability, adaptability, and maintenance convenience. The following is a speci
-
How to adjust the warp position of the warp stop standion of the warp stop stand
2025-05-26Adjusting the warp position of the stop frame can be approached from the following aspects: 1. Adjustment of front and rear positions Based on the characteristics of the warp yarn: If the warp sizing quality is good and the single yarn strength is strong, the warp stop frame can be moved as far back as possible. This can increase the opening length of the warp yarn, reduce the amplitude o
-
How to control the operation of the weaving machine through the stopping electrical box
2025-05-19The warp stopping electrical box controls the operation of the weaving machine through the following methods: 1. Check the warp state: The warp stopping electrical box is connected to the warp stopping strip, and there are warp stopping pieces strung on the warp stopping strip. Each warp passes through the corresponding warp stopping piece. When the weaving machine is running normally, the warp y
-
What is the function of the intermediate bracket in textile equipment
2025-05-12The intermediate bracket of textile equipment plays an important role in textile equipment, mainly including the following aspects: 1. Supporting function Provide stable support for textile equipment to ensure that it maintains the correct position and posture during operation. For example, in the spinning process, the intermediate bracket can support equipment such as rollers and leather
-
What are the advantages of using two sets of stopping frames for the Tsuda Koma jet towel loom
2025-05-05The Tsudakoma jet towel loom has the following advantages when using two rows of warp stopping frames: 1. Improve fabric quality Correctly detecting broken ends: The warp and weft of towel fabrics usually have different tension and motion characteristics. Two sets of warp stopping frames can be set with different specifications of warp stopping pieces for ground warp and wool warp, which c
-
What are the characteristics of the 6-row warp stopping device used in Gamma looms
2025-04-28The 6-row warp stopping device used in Gamma looms has the following characteristics: 1. Trigger sensitivity: By fixedly connecting one end of the torsion spring to the trigger piece, when the warp state changes, it can quickly drive the trigger piece to change the angle, thereby triggering the warp stopping action in a timely manner, causing the loom to quickly stop running and effectively avoid
Home
Product
Wechat
Telephone